MV-SC3060XM-16M-WBN

Resolution
3200 × 1920
Color / Mono
Mono
Focal length
16 mm
Light source
Focused white light by default. Red, blue, IR, or UV light is optional.
Data interface
Fast Ethernet (100 Mbit/s)
SKU: HIK-MV-SC3060XM-16M-WBN Category:
Contact us to inquire about this product

If you love this product and wish for a customized quote contact us at number +34 91 3854 395 and we will be happy to provide you with more info!

Product overview

HIKROBOT SC3000X smart camera.

Vision tools: Measurement: P2P measurement, P2L measurement, contrast measurement, grayscale size, edge width measurement, width measurement, brightness average value, L2L angle, color measurement, color size, diameter measurement, line angle Existence: Spot existence, edge existence, contour existence, pattern existence, circle existence, line existence, anomaly judge, existence detection Count: Spot count, edge count, contour count, pattern count, learning-based count, color count Recognition: Multi-object count, code recognition, color contrast, color recognition, category recognition, classification registration, object registration, OCR, learning-based OCR, character horizontal stripe detection Logic: Calculator, if module, logic judge, format output, condition judge, character comparison, combination judge Location: Calibration convert, single point alignment, point rectify, point grasp, scale transformation, fixture Deep learning: DL classification, DL object detection Defect detection: Anomaly detection Industry tools: OCR and defect detection

Resolution: 3200 × 1920; Color / Mono: Mono; Focal length: 16 mm; Light source: Focused white light by default. Red, blue, IR, or UV light is optional.; Data interface: Fast Ethernet (100 Mbit/s).

Documentation

HIKROBOT MV-SC3060XM family datasheet

ManufacturerHIKROBOT
Image resolution and acquisition mode3200 × 1920
Image acquisition frame rate and conditions20 fps
Shutter typeRolling shutter
Data interfaceFast Ethernet (100 Mbit/s)
Color modeMono
Exposure range540 µs to 200 ms
Family documentationView family documentation
Sensor layoutArea scan
Detector technologyCMOS
Sensor format and configuration1/2.4"
Pixel pitch2 × 2 µm
Lens mountM12-mount, mechanical focus supported
DimensionsStraight angle: 80.1 mm × 43 mm × 43.5 mm Right angle: 58.5 mm × 43 mm × 64.6 mm
Focal length16 mm
Camera seriesSC3000X
Video output formatsMono 8
Ingress protection and conditionsIP67 (under proper installation of lens and wiring)
Supply voltage12 VDC to 24 VDC
Power consumption and conditionsAvg.: 6.6 W @ 24 VDC (light source enabled) Max.: 22 W @ 24 VDC (light source enabled)
Gain range0 dB to 33 dB
Operating temperature and measurement pointWorking temperature: 0 °C to 50 °C
Communication protocolsRS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC/SLMP, FINS, Keyence KV
Light source and configurationFocused white light by default. Red, blue, IR, or UV light is optional.
Digital I/O and connectors12-pin M12 connector provides power and I/O, including isolated input (Line 0/1/2) × 3, isolated output (Line 3/4/5) × 3, RS-232 × 1 Supports device triggering via pressing top trigger button
Model configuration details
Vision tool âš« Measurement: P2P measurement, P2L measurement, contrast measurement, grayscale size, edge width measurement, width measurement, brightness average value, L2L angle, diameter measurement, line angle âš« Existence: Spot existence, edge existence, contour existence, pattern existence, circle existence, line existence, anomaly judge, existence detection âš« Count: Spot count, edge count, contour count, pattern count, learning-based count âš« Recognition: Multi-object count, code recognition, category recognition, classification registration, object registration, OCR, learning-based OCR, character horizontal stripe detection âš« Logic: Calculator, if module, logic judge, format output, condition judge, character comparison, combination judge âš« Location: Calibration convert, single point alignment, point rectify, point grasp, scale transformation, fixture âš« Deep learning: DL classification, DL object detection âš« Defect detection: Anomaly detection âš« Industry tools: OCR and defect detection
Solution capacity Supports importing and exporting solutions, up to 32 solutions can be stored.
Communication protocol RS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC/SLMP, FINS, Keyence KV
Sensor type CMOS, rolling shutter
Pixel size 2 µm × 2 µm
Sensor size 1/2.4"
Resolution 3200 × 1920
Max. frame rate 20 fps
Gain 0 dB to 33 dB
Exposure time 540 µs to 200 ms
Pixel format Mono 8
Mono/color Mono
Data interface Fast Ethernet (100 Mbit/s)
Digital I/O 12-pin M12 connector provides power and I/O, including isolated input (Line 0/1/2) × 3, isolated output (Line 3/4/5) × 3, RS-232 × 1 Supports device triggering via pressing top trigger button
Power supply 12 VDC to 24 VDC
Power consumption Avg.: 6.6 W @ 24 VDC (light source enabled) Max.: 22 W @ 24 VDC (light source enabled)
Lens mount M12-mount, mechanical focus supported
Focal Length 16 mm
Lens cap Half-polarized lens cap by default. Transparent or fully-polarized lens cap is optional.
Light source Focused white light by default. Red, blue, IR, or UV light is optional.
Aiming system 2 LEDs
Indicator 360° visual indicator
Dimension Straight angle: 80.1 mm × 43 mm × 43.5 mm (3.2" × 1.7" × 1.7") Right angle: 58.5 mm × 43 mm × 64.6 mm (2.3" × 1.7" × 2.5")
Weight Approx. 190 g (0.4 lb.)
Ingress protection IP67 (under proper installation of lens and wiring)
Temperature Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F)
Humidity 20% RH to 95% RH (no condensation)
Vibration resistance Meets standard IEC 60068-2-6:2007. Device only (without installation bracket): 10 Hz to 55 Hz, 1.5 mm peak-to-peak amplitude, 2 hours per axis (X, Y, Z)
Shock resistance Meets standard IEC 60068-2-27:2008. Device only (without installation bracket): 30 g / 11 ms, half-sine wave, 500 shocks per axis (6 directions)
Client software SCMVS
Certification CE, KC

Values and conditions describe this exact model or the applicable column in its family datasheet. Maximum rates depend on the documented acquisition, output format, lighting and operating configuration. The image is the manufacturer’s representative photograph extracted from the verified document; it may show another documented lens or mounting option within the family. Optional lenses, illumination, cables and accessories are not implied to be included.

The linked PDF is an original HIKROBOT manufacturer document recovered from a distributor. Its revision is retained as supplied; confirm the required hardware revision, software compatibility and availability with IberOptics. No stock availability is asserted.

I have read and accepted your terms and conditions and privacy policy