BM-A-5W-10-B-ENH

High Speed Thermal Sensors; model-specific configuration and conditions are listed in the technical table.

SKU: LPT-BM-A-5W-10-B-ENH Category:
Contact us to inquire about this product

If you love this product and wish for a customized quote contact us at number +34 91 3854 395 and we will be happy to provide you with more info!

Product overview

BM-A-5W-10-B-ENH is a high speed thermal sensors from LaserPoint. The technical configuration table below is taken from the manufacturer's page for this model. Values, alternative modes, wavelength-specific performance, measurement conditions and option codes must be read together. The current model-specific manufacturer page is the source for the listed specifications; the shared 2023 catalog is historical family documentation and covers this ordering code. Where revisions differ, use the current model table and confirm the selected configuration with IberOptics. The image is the manufacturer’s product or family photograph/diagram linked from this model page and does not imply that optional accessories are included. Availability must be confirmed with IberOptics.

Documentation

LaserPoint product-family catalog (2023, Rev. 1; historical manufacturer document)

ManufacturerLaserPoint
CoolingCooling: Convection (b)
Spectral range and conditionsAbsorber Spectral Range: 0.5 - 11 µm
Family documentationView family documentation
DimensionsDimensions: 60 x 60 x 16.5 mm
Product typeHigh Speed Thermal Sensors
Manufacturer document and hardware revisionLaserPoint product-family catalog (2023, Rev. 1; historical manufacturer document)
Measured power and conditionsMax. Average Power: 5 W
Measured energy and conditionsMax. Energy: 20 mJ
Active apertureAperture: 10 x 10 mm
Measurement uncertaintyPower Calibration Uncertainty: ± 5%
Model configuration details
Power Mode
Max. Average Power 5 W
Max. Average Power (1) 25 W
Power Calibration Uncertainty ± 5%
Energy Mode
Max. Energy 20 mJ
Min. Energy 3 µJ
Max repetition rate 1 MHz
Energy Resolution 0.1 µJ
Energy Calibration Uncertainty ± 5%
Absorber Specs
Aperture 10 x 10 mm
Type B
Spatial Uniformity (2) ± 5 %
Min. Beam diameter 0.5 mm
Absorber Spectral Range 0.5 - 11 µm
Calibration Spectral Range 0.532 µm
1.07 µm
(a)
Max Power Density (3) 5 kW/cm²
Max Energy Density (4) 120 mJ/cm²
General Characteristics
Cooling Convection (b)
Maximum sensor operating temperature 60 °C
Weight 130 g
Dimensions 60 x 60 x 16.5 mm
Cable length 2 m
Stand and Post Light Duty Stand
Notes
(1) max 2 sec exposure,
max 20% duty cycle.
(2) laser beam over 6x6 mm central area
(3) Damage thresholds also depend on power level.
(4) Single shot
(a). Others wavelength on request
(b). Recommended ambient temperature: 10 -30 °C

I have read and accepted your terms and conditions and privacy policy