A-2-D12-BBF

Thermal Sensors; model-specific configuration and conditions are listed in the technical table.

SKU: LPT-A-2-D12-BBF Category:
Contact us to inquire about this product

If you love this product and wish for a customized quote contact us at number +34 91 3854 395 and we will be happy to provide you with more info!

Product overview

A-2-D12-BBF is a thermal sensors from LaserPoint. The technical configuration table below is taken from the manufacturer's page for this model. Values, alternative modes, wavelength-specific performance, measurement conditions and option codes must be read together. The current model-specific manufacturer page is the source for the listed specifications; the shared 2023 catalog is historical family documentation and covers this ordering code. Where revisions differ, use the current model table and confirm the selected configuration with IberOptics. The image is the manufacturer’s product or family photograph/diagram linked from this model page and does not imply that optional accessories are included. Availability must be confirmed with IberOptics.

Documentation

LaserPoint product-family catalog (2023, Rev. 1; historical manufacturer document)

ManufacturerLaserPoint
CoolingCooling: Conduction (a)
Spectral range and conditionsAbsorber Spectral Range: 0.19 - 11 µm
Data interfaceCable length - connector: 1.5 m - Bare wire
Family documentationView family documentation
Product typeThermal Sensors
Manufacturer document and hardware revisionLaserPoint product-family catalog (2023, Rev. 1; historical manufacturer document)
Measured power and conditionsMax. Average Power: 2 W
Measured energy and conditionsMax Energy Density (2): 5ms pulse width: 3.6 J/cm² 10µs pulse width: 0.2 J/cm² 10ns pulse width: 0.1 J/cm²
Response time and conditionsResponse Time (0-90%): < 1 sec
Active apertureAperture: 12 mm
Model configuration details
Power Mode
Max. Average Power 2 W
Min. Power 8 mW
Power Resolution 0.4 mW
Response Time (0-90%) < 1 sec
Power Linearity (1) ± 1%
Absorber Specs
Aperture 12 mm
Type BBF
Absorber Spectral Range 0.19 - 11 µm
Calibration Spectral Range 0.19 - 2.1 µm, 2.94µm, 9 - 11 µm
Max Power Density (2) 200 W/cm²
Max Energy Density (2) 5ms pulse width: 3.6 J/cm²
10µs pulse width: 0.2 J/cm²
10ns pulse width: 0.1 J/cm²
Amplifier Specs
Amplifier Input Voltage ±7 to ±12 VDC, or 14 to 24 VDC floating
Output Voltage @ Full Scale 5 V
Min Detectable Voltage 5 mV
Sensitivity 2500 mV/W
General Characteristics
Cooling Conduction (a)
Weight 0.2 kg
Dimension 50 x 50 x 30 mm
Cable length - connector 1.5 m - Bare wire
Notes
(1). Detector centrally irradiated @50% of useful surface.
(2). Damage thresholds also depend on power level. Please see damage graphs for more details.
(a). Conduction, through heat sink

I have read and accepted your terms and conditions and privacy policy