| Vision tool |
âš« Measurement: P2P measurement, P2L measurement, contrast measurement, grayscale size, edge width measurement, width measurement, brightness analysis, L2L angle, color measurement, color size, diameter measurement, line angle âš« Existence: Existence detection, anomaly judge, spot existence, edge existence, contour existence, pattern existence, circle existence, line existence âš« Count: Learning-based count, spot count, edge count, contour count, pattern count, color count âš« Recognition: Multi-object count, category recognition, code recognition, OCR, color contrast, color recognition âš« Logic: Calculator, if module, logic judge, condition judge, string comparison, combination judge, format output âš« Defect detection: Anomaly detection âš« Location: Calibration convert, single point alignment, point rectify, point grasp, scale transformation, fixture |
| Solution capacity |
Supports solution importing and exporting, up to 16 solutions and 40 modules can be stored. |
| Communication protocol |
RS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC/SLMP, FINS, Keyence KV |
| Sensor type |
CMOS, global shutter |
| Pixel size |
2.7 µm × 2.7 µm |
| Sensor size |
1/4" |
| Resolution |
1280 × 1024 |
| Max. frame rate |
55 fps |
| Gain |
0 dB to 29 dB (analog gain) |
| Exposure time |
35 µs to 100 ms |
| Pixel format |
RGB 8, Mono 8 |
| Mono/color |
Color |
| Data interface |
Fast Ethernet (100 Mbit/s) |
| Digital I/O |
17-pin M12 connector provides power and I/O, including isolated input (Line 0/1) × 2, isolated output (Line 2/3) × 2, RS-232 × 1 Supports device triggering via pressing side button. |
| Power supply |
24 VDC |
| Power consumption |
Avg.: 5 W @ 24 VDC (light source enabled) Max.: 12 W @ 24 VDC (light source enabled) |
| Lens mount |
M12-mount, mechanical autofocus supported |
| Focal Length |
12 mm |
| Lens cap |
Transparent lens cap by default. Half-polarized and fully-polarized caps are optional. |
| Light source |
White light by default. Red, blue, IR, UV, and two-color (red/blue) lights are optional. |
| Aiming system |
2 green LED lights |
| Indicator |
Power indicator (PWR), network indicator (LNK), result indicator (OK/NG), user-defined indicator (U1) |
| Dimension |
Straight angle: 72.7 mm × 31.5 mm × 41 mm (2.9" × 1.2" × 1.6") Right angle: 51.5 mm × 31.5 mm × 61 mm (2.0" × 1.2" × 2.4") |
| Weight |
118 g (0.3 lb.) |
| Ingress protection |
IP65 |
| Temperature |
Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity |
20% RH to 95% RH (no condensation) |
| Vibration resistance |
Meets standard IEC 60068-2-6:2007. Device only: 10 Hz to 55 Hz, 1.5 mm peak-to-peak amplitude, 2 hours per axis (X, Y, Z) |
| Shock resistance |
Meets standard IEC 60068-2-27:2008. Device only: 30 g / 11 ms, half-sine wave, 500 shocks per axis (6 directions) |
| Client software |
SCMVS |
| Certification |
CE, KC |