Product overview
Belt-Drive LC40 Gantry Parallel Support Rail. Maximum travel: 3000 × 400 mm. Payload up to up to 50 kg. Highest axis speed: up to 3000 mm/s.
This configurable system uses LC40 linear stages and the appropriate brackets, cables and motor-control options. The parallel support rail uses one powered X axis and a coupled or passive support rail. Assembly, alignment and structural support are required as described in the shared LC40 gantry manual. Published maximum payload, travel and speed refer to selectable configurations and must not be assumed simultaneously, especially at long unsupported spans. Highest axis speed is not a guaranteed Z-axis speed or a speed at maximum payload.
Best and maximum specifications may describe different variants or conditions and must not be assumed simultaneously. The product image is representative; the selected travel, accessories and configuration may differ.
Documentation
LC40 family technical documentation — compiled official datasheets





